NanoPlaster 108

+90 232 880 70 66

info@lyksor.com

NanoPlaster 108

Air Entraining / Plasticizing Chemical Admixture for Mortar and Plaster

Nanoplaster 108 is an air entraining / plasticizing chemical admixture designed for improving the cohesion of cement – sand mortar and plaster mixtures.

Use

Cement mortars of masonry structures made of clay brick, concrete and stone blocks.
To improve the cohesiveness and workability of cement mortars and plasters.
Mortar and plasters exposed to freeze and thaw cycles.
Mortar, plaster and ready-to-use mortars prepared in construction sites.

Advantages and Properties

Nanoplaster 108 forms uniformly dispersed microscopic air bubbles due to the effect of surfactants available in its microstructure.
Improves the workability of fresh mixture because of the lubricating effect of air bubbles and increased paste content due to the micro bubble formation.
Decreases the water demand of the mixture due to the enhanced workability, improves strength and bonding capacity of mortar without the need of slaked lime usage.
Increases the cohesion and segregation resistance of fresh mortar.
Provides economy in cement content due to the improved workability allowing to increase sand to cement ratio of mortar.
Improves freeze and thaw resistance of mortar and plasters.
Reduces the plastic shrinkage crack risk by reducing bleeding.
Does not contain chloride or any other substances that may cause corrosion.